Information reviewed: 16 November 2026

A party-wall project can need several different records: measured geometry, a schedule of condition, notices, an award and sometimes monitoring. These are not interchangeable. Our residential measured survey service supplies agreed plans, sections and elevations that can help the appointed professionals understand the existing relationships between buildings.

Adjoining terraced houses — illustration
Illustrative view: adjoining terraced houses.

What the measured survey contributes

A clear section can show floor levels, roof relationships, visible adjoining structures and the position of a proposed connection. A plan can locate the relevant walls and openings. These records help the designer and party-wall surveyor discuss the same geometry rather than working from unrelated sketches.

The measured survey does not establish ownership, determine whether a wall legally falls within a particular category, serve notices or make an award. Those questions require the relevant legal and professional assessment. Hidden foundations and wall construction also remain unknown unless separately investigated.

The Party Wall etc. Act 1996 applies in England and Wales and operates separately from planning permission and building regulations. It covers specified work to party structures, certain new walls and qualifying excavation near neighbouring buildings. The three- and six-metre excavation provisions depend on depth and geometry, not distance alone.

Use the government’s explanatory booklet as a starting point and ask the appointed party-wall professional to assess the actual proposal. A measured distance on a drawing is useful evidence, not a complete legal conclusion.

Distinguish the records

Record Main purpose Important limitation
Measured survey Existing geometry and spatial relationships Does not diagnose the cause of defects
Schedule of condition Dated description and photographs of visible condition Scope and access must be agreed
Party-wall award Records the matters determined under the relevant procedure Not produced by ordinary scanning
Monitoring record Repeated observations against a designed baseline Needs an agreed method and response process

Commission the combination the project requires. A point cloud can support the record but should not be assumed to replace close-up condition photographs or written observations of finishes.

Wall condition record — illustration
Illustrative view: wall condition record.

Useful measurements for an extension or loft

Ask the party-wall surveyor and engineer which sections and levels they need. For a loft, the relationship between floors, roof and adjoining structure may be important. For an extension or basement, external levels and the proposed excavation relationship may be relevant.

If foundation depth matters, ordinary scanning cannot supply concealed information. Coordinate any investigation and show its source separately on the drawing. Do not infer a neighbour’s foundation from a nearby exposed feature without the responsible professional’s assessment.

Our SW19 semi-detached project and E12 Victorian house project illustrate measured outputs for relevant building types. They are not examples of legal advice or proof that a particular notice procedure applies elsewhere.

Access and recording should be planned

Identify which neighbouring areas need inspection and obtain the appropriate access arrangements through the responsible parties. Record the visit date, accessible rooms, limitations and the relationship between photographs and drawing references.

For condition work, a useful record lets another reader locate the observation. A close photograph of a crack without a room reference or wider view can be difficult to interpret later. Agree who records condition and who is responsible for the report, rather than leaving the task between appointments.

Baseline scans and repeat monitoring

A baseline captures a particular time. Monitoring requires repeated observations using an appropriate reference and method. The designer or monitoring specialist should establish what change is being measured, the observation frequency and the action thresholds.

Two scans made with different coverage or registration should not be compared casually as proof of movement. The uncertainty of the comparison must be considered. See our point-cloud QA guide and basement survey guide when defining the wider information package.

Adjoining house sections — illustration
Illustrative view: adjoining house sections.

Frequently asked questions

Is a schedule of condition always compulsory?

Do not assume a universal requirement. The appointed party-wall professional should advise on the appropriate procedure and documentation for the works. A carefully agreed condition record can nevertheless be useful evidence.

Does a measured survey replace a structural engineer?

No. It can provide geometry for the engineer, but structural assessment, design and investigation are separate responsibilities.

What should I include in the survey request?

Send the proposal and the professional team’s drawing requirements. Identify the relevant walls, floors, neighbouring areas, critical sections and available access so that the measurement scope is explicit.

References and review date

References checked on 16 November 2026. Requirements can change; confirm the applicable edition and project-specific requirements when appointing the team.